4 thoughts on “Agricultural sprayer, copper noble head and plastic sprinkler, which fabricus is good?”
Kristie
The sprayer is an important tool for farmers to plant land. It is mainly used to spray various pesticides. When using the sprayer, the atomization effect of the nozzle is an important indicator for testing the good or bad of the sprayer. The smaller the droplets out of the out of the crops, the more uniform spraying on the crops. Whether it is insecticidal sterilization, the effect will be better. There are two types of nozzles in the development of the sprayer, one is metal, and the other is plastic. So which kind of no sprayer of the sprayer is better? See me?
When the sprayer is sprayed with pesticides, which atomize the copper sprinkler and plastic? Personally, these two nozzles are atomized, and there is no difference. The size of the fog, from far and near, can be adjusted through the sprinkler. Both of the copper sprinkler and plastic spray head are basically no. The nozzle is a little higher than the plastic sprinkler, and everyone has its own advantages and disadvantages.
Thenon sprayer with copper spray
Spray, as long as the water source blended through the large cover filter of the medicine barrel, and the switch filter two filtration, the potion in the barrel will be relatively clean, so that it will not block the spray spray, right? , So you use the copper sprinkler to cost more expensive. The price of a nozzle is about a dozen dollars, but the copper noble head just says that it will not rust, but it is relatively thin. Essence
The agricultural sprayer uses plastic spray
The spray head is not only cheap, only 5 yuan each, but also the atomization quality is similar to the copper sprinkler. It is just that if you have poor quality and water quality and block the spray head, you often use iron wire and bamboo sticks to dig. The sprinkler's mouth increased, affecting the increase in atomization.
but it doesn't matter. Anyway, the price of a copper nozzle is three times that of the plastic sprinkler. Just change it, right?
. Which of the new copper noble and plastic sprinkler is good? In theory, these two spray atomization is good. Both are produced by regular manufacturers. There are no major problems in quality, and the current spray heads are relatively advanced. There will be a certain difference in the service life and durability of plastic and metals. If you want cheap, you can choose plastic. If you want to be durable and strong, you can choose metal.
It is the best to lit with copper sprinkler directly, because the copper sprinkler is not easy to rust, and then it is relatively strong. If the plastic sprinkler is used, it will be used directly for a long time.
It must be that the agricultural sprayer of the copper sprinkler will be better, because it is stronger, the quality is particularly good, it is not easy to grow rust and it is not easy to break.
The sprayer is an important tool for farmers to plant land. It is mainly used to spray various pesticides. When using the sprayer, the atomization effect of the nozzle is an important indicator for testing the good or bad of the sprayer. The smaller the droplets out of the out of the crops, the more uniform spraying on the crops. Whether it is insecticidal sterilization, the effect will be better. There are two types of nozzles in the development of the sprayer, one is metal, and the other is plastic. So which kind of no sprayer of the sprayer is better? See me?
When the sprayer is sprayed with pesticides, which atomize the copper sprinkler and plastic? Personally, these two nozzles are atomized, and there is no difference. The size of the fog, from far and near, can be adjusted through the sprinkler. Both of the copper sprinkler and plastic spray head are basically no. The nozzle is a little higher than the plastic sprinkler, and everyone has its own advantages and disadvantages.
Thenon sprayer with copper spray
Spray, as long as the water source blended through the large cover filter of the medicine barrel, and the switch filter two filtration, the potion in the barrel will be relatively clean, so that it will not block the spray spray, right? , So you use the copper sprinkler to cost more expensive. The price of a nozzle is about a dozen dollars, but the copper noble head just says that it will not rust, but it is relatively thin. Essence
The agricultural sprayer uses plastic spray
The spray head is not only cheap, only 5 yuan each, but also the atomization quality is similar to the copper sprinkler. It is just that if you have poor quality and water quality and block the spray head, you often use iron wire and bamboo sticks to dig. The sprinkler's mouth increased, affecting the increase in atomization.
but it doesn't matter. Anyway, the price of a copper nozzle is three times that of the plastic sprinkler. Just change it, right?
. Which of the new copper noble and plastic sprinkler is good? In theory, these two spray atomization is good. Both are produced by regular manufacturers. There are no major problems in quality, and the current spray heads are relatively advanced. There will be a certain difference in the service life and durability of plastic and metals. If you want cheap, you can choose plastic. If you want to be durable and strong, you can choose metal.
It is the best to lit with copper sprinkler directly, because the copper sprinkler is not easy to rust, and then it is relatively strong. If the plastic sprinkler is used, it will be used directly for a long time.
It must be that the agricultural sprayer of the copper sprinkler will be better, because it is stronger, the quality is particularly good, it is not easy to grow rust and it is not easy to break.
I think the copper sprinkler is better, because it is particularly strong, it is not easy to damage, but the plastic sprinkler is easily damaged.