5 thoughts on “How to identify the gold ring bought by Zhou Dajin is fake?”
Kyle
Distinguish the authenticity: 1, whether the gold has white highlights Masted the gold bar or gold jewelry with materials to observe the cut surface with a magnifying glass. It indicates that the gold is mixed with 金. 2, measured the proportion. In the weight of a pure gold bars with an balance, and then put the gold bars into a measuring cup and flood the gold bar. Then put the detected gold bars in a measuring cup, whether the scale of the water rises or decreases. As long as it changes, it means that the gold bar is not pure gold. But if it is gold jewelry, this method is not applicable because there is air in gold jewelry. 3, real gold is not afraid of fire. This gold bars or gold jewelry burned for a while to observe its changes. Because the oxidation reaction occurs with oxygen in the air, the gold bars with insufficient purity will become gray; and the color of the pure gold will be red after the fire is baked. However, this method may be destroyed to jewelry. The expansion information Gold cleaning method: 1. Protect the gloss of the gold jewelry, you can apply a layer of nail polish thinly on it. 2. If there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, are made into a "golden device cleaning agent", put the gold jewelry in a bowl, and the golden jewelry is in a bowl. Pour in the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth. 3, the ring inlaid with a cotton roll with a popsicle or match stick, wet the gemstone and its frame in the mixed fluid of the dew and glycerin, and then use the velvet cloth to brighten the ring. Do not scrape it with a kind of sharp objects. 4, salt and vinegar mixed synthetic cleaning agent, using it to wipe the pure gold jewelry, which can make a long time. 5, wipe or scrub with hot rice soup with hot rice, can also restore gloss. 6, scrubbing with ammonia water. Reference materials Source: Baidu Encyclopedia-Gold
All gold can be identified according to the standard method: (1) See color: the higher the purity of the gold jewelry, the deeper the color. If there is no gold medal, you can determine the general color according to the following color (based on green gold. The so-called green gold contains only silver ingredients in gold); dark red yellow color is more than 95 %, light red yellow 90-95 % The pale yellow is 80-85 %, the cyan is 65-70 %, and the white light is only 50--60 % white light. The slightly yellow and white are less than 50 %. Generally, Qiqing, Eight Huang, and Jiu Chi can be used as a reference. (2) Type weight: The proportion of gold is 19.32, which is more important than metal such as silver, copper, lead, zinc, aluminum. The volume of gold is more than 40 % heavier than the silver, 1.2 times heavier than copper, and 6.1 times heavier than aluminum. The gold jewelry should have a feeling of sinking in the hand, and the fake gold jewelry feels lightly. This method is not suitable for gold jewelry inlaid.
(3) Look at the hardness: pure gold is soft and low. It can draw light marks with nails. Teeth bite can leave tooth prints. High -colored gold jewelry is low and soft, with copper with copper, contains copper containing copper, contains copper containing copper The harder, the harder, the bending method can also test the hardness, the pure gold is soft, it is easy to bend, the lower the purity, the less likely to bend.
(4) Listening to the sound: Real gold with a color of more than 99 % throwing it on the hard ground, it will make a tap sound, there is no rhyme or elasticity. The fake or low golden sound is crispy but no dullness. Generally, the sound of "Dangdang" is emitted, and there are surplus sounds.
(5) Burning with fire: The jewelry will be burned red (do not melt the jewelry) with fire (do not melt the jewelry), and observe the color change after cooling. Dark or different degrees of darkness is not pure gold. Generally, the lower the color, the stronger the color, and the darkens are all, indicating that it is a fake gold jewelry.
(6) Seeing the mark: Domestic gold jewelry is allicized and prepared according to international standards, and the killing records, such as "24K" indicate "foot red" or "foot gold"; The word "18K" is marked, and those who have a lower color are lower than LOK. At present, illegal elements are commonly used to manufacture fake cards and imitation stamps in the society. They use rare gold, Asian gold, and even brass to impersonate real gold. Therefore, the identification of gold jewelry must be comprehensively determined according to the sample to determine the true and false and the quality of the real.
To be honest, you don’t have to worry about Zhou Dajin. You don’t have to worry about it because he dare not buy a fake. You don’t have to identify it. It ’s true that you do n’t recognize it. You can only see it at most. of
Distinguish the authenticity:
1, whether the gold has white highlights
Masted the gold bar or gold jewelry with materials to observe the cut surface with a magnifying glass. It indicates that the gold is mixed with 金.
2, measured the proportion.
In the weight of a pure gold bars with an balance, and then put the gold bars into a measuring cup and flood the gold bar. Then put the detected gold bars in a measuring cup, whether the scale of the water rises or decreases. As long as it changes, it means that the gold bar is not pure gold. But if it is gold jewelry, this method is not applicable because there is air in gold jewelry.
3, real gold is not afraid of fire.
This gold bars or gold jewelry burned for a while to observe its changes. Because the oxidation reaction occurs with oxygen in the air, the gold bars with insufficient purity will become gray; and the color of the pure gold will be red after the fire is baked. However, this method may be destroyed to jewelry.
The expansion information
Gold cleaning method:
1. Protect the gloss of the gold jewelry, you can apply a layer of nail polish thinly on it.
2. If there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of clear water, are made into a "golden device cleaning agent", put the gold jewelry in a bowl, and the golden jewelry is in a bowl. Pour in the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3, the ring inlaid with a cotton roll with a popsicle or match stick, wet the gemstone and its frame in the mixed fluid of the dew and glycerin, and then use the velvet cloth to brighten the ring. Do not scrape it with a kind of sharp objects.
4, salt and vinegar mixed synthetic cleaning agent, using it to wipe the pure gold jewelry, which can make a long time.
5, wipe or scrub with hot rice soup with hot rice, can also restore gloss.
6, scrubbing with ammonia water.
Reference materials Source: Baidu Encyclopedia-Gold
All gold can be identified according to the standard method:
(1) See color: the higher the purity of the gold jewelry, the deeper the color. If there is no gold medal, you can determine the general color according to the following color (based on green gold. The so-called green gold contains only silver ingredients in gold); dark red yellow color is more than 95 %, light red yellow 90-95 % The pale yellow is 80-85 %, the cyan is 65-70 %, and the white light is only 50--60 % white light. The slightly yellow and white are less than 50 %. Generally, Qiqing, Eight Huang, and Jiu Chi can be used as a reference. (2) Type weight: The proportion of gold is 19.32, which is more important than metal such as silver, copper, lead, zinc, aluminum. The volume of gold is more than 40 % heavier than the silver, 1.2 times heavier than copper, and 6.1 times heavier than aluminum. The gold jewelry should have a feeling of sinking in the hand, and the fake gold jewelry feels lightly. This method is not suitable for gold jewelry inlaid.
(3) Look at the hardness: pure gold is soft and low. It can draw light marks with nails. Teeth bite can leave tooth prints. High -colored gold jewelry is low and soft, with copper with copper, contains copper containing copper, contains copper containing copper The harder, the harder, the bending method can also test the hardness, the pure gold is soft, it is easy to bend, the lower the purity, the less likely to bend.
(4) Listening to the sound: Real gold with a color of more than 99 % throwing it on the hard ground, it will make a tap sound, there is no rhyme or elasticity. The fake or low golden sound is crispy but no dullness. Generally, the sound of "Dangdang" is emitted, and there are surplus sounds.
(5) Burning with fire: The jewelry will be burned red (do not melt the jewelry) with fire (do not melt the jewelry), and observe the color change after cooling. Dark or different degrees of darkness is not pure gold. Generally, the lower the color, the stronger the color, and the darkens are all, indicating that it is a fake gold jewelry.
(6) Seeing the mark: Domestic gold jewelry is allicized and prepared according to international standards, and the killing records, such as "24K" indicate "foot red" or "foot gold"; The word "18K" is marked, and those who have a lower color are lower than LOK. At present, illegal elements are commonly used to manufacture fake cards and imitation stamps in the society. They use rare gold, Asian gold, and even brass to impersonate real gold. Therefore, the identification of gold jewelry must be comprehensively determined according to the sample to determine the true and false and the quality of the real.
To be honest, you don’t have to worry about Zhou Dajin. You don’t have to worry about it because he dare not buy a fake. You don’t have to identify it. It ’s true that you do n’t recognize it. You can only see it at most. of
Pure gold jewelry has a mark-thousands of gold.
Is Zhou Dajin who bought invoices for invoicing?